Thursday, August 31, 2006

NES history

Nintendo Entertainment System, or NES, is an 8-bit video game console released by Nintendo in North America, Brazil, Europe, Asia, and Australia. Its Japanese equivalent is known as the Nintendo Family Computer or Famicom. The most successful gaming console of its time in Asia and North America (Nintendo claims to have sold over 60 million NES units worldwide), it helped revitalize the video game industry following the video game crash of 1983, and set the standard for subsequent consoles in everything from game design to business practices. The NES was the first console for which the manufacturer openly courted third-party developers.

Following a series of arcade game successes in the early 1980s, Nintendo made plans to produce a cartridge-based console. Masayuki Uemura designed the system, which was released in Japan on July 15, 1983 for ¥14,800 alongside three ports of Nintendo's successful arcade games Donkey Kong, Donkey Kong Jr., and Popeye. The Nintendo Family Computer (Famicom) was slow to gather momentum: during its first year, many criticized the system as unreliable, prone to programming errors and rampant freezing. Following a product recall and a reissue with a new motherboard, the Famicom’s popularity soared, becoming the best-selling game console in Japan by the end of 1984. Encouraged by their successes, Nintendo soon turned their attentions to the North American market.

Nintendo entered into negotiations with Atari to release the Famicom under Atari’s name as the name "Nintendo Enhanced Video System." This deal eventually fell through Subsequent plans to market a Famicom console in North America featuring a keyboard, cassette data recorder, wireless joystick controller, and a special BASIC cartridge under the name "Nintendo Advanced Video System" likewise never materialized. Finally, in June 1985 Nintendo unveiled its American version of the Famicom at the Consumer Electronics Show (CES). Nintendo rolled out its first systems to limited American markets on October 18, 1985, following up with a full-fledged North American release of the console in February of the following year. Nintendo simultaneously released eighteen launch titles: 10-Yard Fight, Baseball, Clu Clu Land, Donkey Kong Jr. Math, Duck Hunt, Excitebike, Golf, Gyromite, Hogan's Alley, Ice Climber, Kung Fu, Mach Rider, Pinball, Stack-Up, Super Mario Bros., Tennis, Wild Gunman, and Wrecking Crew.

In Europe and Australasia, the system was released to two separate marketing regions (A and B). Distribution in region B, consisting of most of mainland Europe (excluding Italy), was handled by a number of different companies, with Nintendo responsible for most cartridge releases; most of region B saw a 1986 release. Mattel handled distribution for region A, consisting of the United Kingdom, Ireland, Italy, Australia and New Zealand, starting the following year. Not until 1990 did Nintendo's newly created European branch take over distribution throughout Europe. Despite the system's lackluster performance outside of Japan and North America, by 1990 the NES had become the best-selling console in video game history.

As the 1990s dawned, however, renewed competition from technologically superior systems such as the 16-bit Sega Mega Drive (known as the Sega Genesis in North America) marked the end of the NES’s dominance. Eclipsed by Nintendo’s own Super Nintendo Entertainment System (SNES), the NES’s user base gradually waned. Nintendo continued to support the system in America through the first half of the decade, even releasing a new version of the console, the NES 2, to address many of the design flaws in the original NES hardware. By 1995, though, in the wake of ever decreasing sales and the lack of new software titles, Nintendo of America officially discontinued the NES. Despite this, Nintendo of Japan kept producing new Nintendo Famicoms for a niche market up until October 2003, when Nintendo of Japan officially discontinued the line. Even as developers ceased production for the NES, a number of high-profile video game franchises and series for the NES were transitioned to newer consoles and remain popular to this day. Nintendo's own Super Mario Bros., The Legend of Zelda, and Metroid franchises began life on the NES, as did Capcom's Mega Man franchise, Konami's Castlevania series, and Square Enix's Dragon Quest and Final Fantasy franchises.

In the years following the official "death" of the NES in the west, a collector’s market based around video rental shops, garage sales and flea markets led some gamers to rediscover the NES. Coupled with the growth of console emulation, the late 1990s saw something of a second golden age for the NES. The secondhand market began to dry up after 2000, and finding ROMs no longer represented the challenge it had in the past. Parallel to the rise of interest in emulation was the emergence of a dedicated NES hardware "modding" scene. Such hobbyists perform tasks such as moving the NES to a completely new case, or just dissecting it for parts or fun. The controllers are particular targets for modding, often being adapted to connect with personal computers by way of a parallel or USB port. Some NES modders have transformed the console into a portable system by adding AA batteries and an LED or LCD screen.

For its North American release, the NES was released in two different configurations, or "bundles." The console deck itself was identical, but each bundle was packaged with different Game Paks and accessories. The first of these sets, the Control Deck, retailed from US$199.99, and included the console itself, two game controllers, and a Super Mario Bros. game pak. The second bundle, the Deluxe Set, retailed for $249.99 and consisted of the console, a R.O.B., an NES Zapper, and two game paks: Duck Hunt and Gyromite.

For the remainder of the NES's commercial lifespan in North America, Nintendo frequently repackaged the console in new configurations to capitalize on newer accessories or popular game titles. Subsequent bundle packages included the NES Action Set, released in November 1988 for $199.99, which replaced both of the earlier two sets, and included the console, the NES Zapper, two game controllers, and a multicart version of Super Mario Bros. and Duck Hunt. The Action Set became the most successful of the packages released by Nintendo. In December 1990, to coincide with the release of the Power Pad floor mat controller, Nintendo released a new Power Set bundle, consisting of the console, the Power Pad, the NES Zapper, two controllers, and a multicart containing Super Mario Bros., Duck Hunt, and World Class Track Meet.[12] That same month, a Sports Set bundle was released, including the console, an NES Satellite infrared wireless multitap adaptor, four game controllers, and a multicart featuring Super Spike V'Ball and Nintendo World Cup.

Two more bundle packages were released using the original model NES console. The Challenge Set, which included the console, two controllers, and a Super Mario Bros. 3 game pak, and the Basic Set, which included only the console and two controllers with no pack-in cartridge. Finally, the redesigned NES 2 was released as part of the final Nintendo-released bundle package, once again under the name Control Deck, including the new style NES 2 console, and two redesigned "dogbone" game controllers. Released in October 1993, this final bundle retailed for $49.99, and remained in production until the discontinuation of the NES in 1995.

Although the Japanese Famicom and the international NES included essentially the same hardware, there were certain key differences between the two systems:

* Different case design. The Famicom featured a top-loading cartridge slot, a 15-pin expansion port located on the unit’s front panel for accessories (as the controllers were hard-wired to the back of the console), and a red and white color scheme. The NES featured a front-loading cartridge slot (often jokingly compared to a toaster), and a more subdued gray, black and red color scheme. An expansion port was found on the bottom of the unit, and the cartridge connector pinout was changed.


* 60-pin vs. 72-pin cartridges. The original Famicom and the re-released AV Family Computer both utilized a 60-pin cartridge design, which resulted in smaller cartridges than the NES (and the NES 2), which utilized a 72-pin design. Four pins were used for the 10NES lockout chip. Ten pins were added that connected a cartridge directly to the expansion port on the bottom of the unit. Finally, two pins that allowed cartridges to provide their own sound expansion chips were removed, a regrettable decision. Many early games (such as StackUp) released in North America were simply Famicom cartridges attached to an adapter (such as the T89 Cartridge Converter) to allow them to fit inside the NES hardware. Nintendo did this to reduce costs and inventory by using the same cartridge boards in America and Japan.

* A number of peripheral devices and software packages were released in for the Famicom. Few of these devices were ever released outside of Japan.

o Famicom Disk System (FDS). Although not included with the original system, a popular floppy disk drive peripheral was released for the Famicom in Japan only. Nintendo never released the Famicom Disk System outside of Japan, citing concerns about software bootlegging. Notable games released for the FDS include Doki Doki Panic, a special edition of Metroid, and the original Super Mario Bros. 2.

o Famicom BASIC was an implementation of BASIC for the Famicom. It allowed the user to program his or her own games. Many programmers got their first experience on programming for the console this way.

o Famicom MODEM was a modem that allowed connection to a Nintendo server which provided content such as jokes, news (mainly about Nintendo), game tips, weather reports for Japan and allowed a small number of programs to be downloaded.

* External sound chips. The Famicom had two cartridge pins that allowed cartridges to provide external sound enhancements. They were originally intended to facilitate the Famicom Disk System’s external sound chip. These pins were removed from the cartridge port of the NES, and relocated to the bottom expansion port. As a result, individual cartridges could not make use of this functionality, and many NES localizations suffered from inferior sound compared to their equivalent Famicom versions. Castlevania III: Dracula’s Curse is a notable example of this problem.

* Hardwired controllers. The Famicom’s original design includes hardwired, non-removable controllers. In addition, the second controller featured an internal microphone for use with certain games. Both the controllers and the microphone were subsequently dropped from the redesigned AV Famicom in favor of the two seven-pin controller ports on the front panel used in the NES from its inception.

* Lockout circuitry. The Famicom contained no lockout hardware, and, as a result, unlicensed cartridges (both legitimate and bootleg) were extremely common throughout Japan and the Far East. The original NES (but not the top-loading NES 2) contained the 10NES lockout chip, which significantly increased the challenges faced by unlicensed developers. Tinkerers at home in later years discovered that disassembling the NES and cutting the fourth pin of the lockout chip (a process now legal with the expiration of the NES patent) would cut power to the chip, removing all effects and greatly improving the console’s ability to play legal games, as well as bootlegs and converted imports. The European release of the console used a regional lockout system that prevented cartridges released in region A from being played on region B consoles, and vice versa.

* Audio/video output. The original Famicom featured an RF modulator plug for audio/video output, while the original NES featured both an RF modulator and RCA composite output cables. The AV Famicom featured only RCA composite output, and the top-loading NES featured only RF modulator output.

The game controller used for the both the NES and Famicom featured a brick-like design with a simple four button layout: two round buttons labelled "B" and "A," a "Start" button, and a "Select" button. Additionally, the controllers utilized the cross-shaped D-pad, designed by Nintendo employee Gunpei Yokoi for Nintendo Game & Watch systems, to replace the bulkier joysticks on earlier gaming consoles' controllers.

The original model Famicom featured two game controllers, both of which were hardwired to the back of the console. The second controller lacked the "Start" and "Select" buttons, but featured a small microphone. Relatively few games made use of this feature. The earliest produced Famicom units initially had squared A and B buttons. This was changed to the circular designs because of the square buttons being caught in the controller casing when pressed down. The NES dropped the hardwired controllers, instead featuring two custom 7-pin ports on the front of the console. Also in contrast to the Famicom, the controllers included with the NES were identical to each other—the second controller lacked the microphone that was present on the Famicom model, and possessed the same "Start" and "Select" buttons as the primary controller.


A number of special controllers designed for use with specific games were released for the system, though very few such devices proved particularly popular. Such devices included, but were not limited to, the NES Zapper (a light gun), the Power Pad, and the ill-fated R.O.B. and Power Glove. The original Famicom featured a deepened DA-15 expansion port on the front of the unit, which was used to connect most auxiliary devices. On the NES, these special controllers were generally connected to one of the two control ports on the front of the unit.

Near the end of the NES’s lifespan, upon the release of the AV Famicom and the top-loading NES 2, the design of the game controllers was modified slightly. Though the original button layout was retained, the redesigned device abandoned the "brick" shell in favor of a "dog bone" shape reminiscent of the controllers of the Super Nintendo Entertainment System. In addition, the AV Famicom joined its international counterpart and dropped the hardwired controllers in favor of detachable controller ports. However, the controllers included with the Famicom AV, despite being the "dog bone" type, had cables which were a short three feet long, as opposed to the standard six feet of NES controllers.

In recent years the original NES controller has become one of the most recognizable symbols of the system. Nintendo has mimicked the look of the controller in several recent products, from promotional merchandise to limited edition versions of the Game Boy Advance SP and Game Boy Micro handheld game consoles.

When Nintendo released the NES in the United States, the design styling was deliberately different from that of other game consoles. Nintendo wanted to distinguish their product from those of competitors, and to avoid the generally poor reputation that game consoles had acquired following the video game crash of 1983. One result of this philosophy was a front-loading zero insertion force (ZIF) cartridge socket designed to resemble the front-loading mechanism of a VCR.

Problems with the 10NES lockout chip frequently resulted in the system’s most infamous problem: the blinking red power light, in which the system appears to turn itself on and off repeatedly. The lockout chip was quite finicky, requiring precise timing in order to permit the system to boot. Dirty, aging, and bent connectors would oftentimes disrupt the timing, resulting in the blink effect. User attempts to solve this problem ranged from blowing air onto the cartridge connectors to slapping the side of the system after inserting a cartridge.

Nintendo’s near monopoly on the home video game market left it with a degree of influence over the industry exceeding even that of Atari during its heyday in the early 1980s. Many of Nintendo’s business practices during this period were heavily criticized, and may have played some role in the erosion of Nintendo’s market share throughout the 1990s. Unlike Atari, who never actively courted third-party developers, and went so far as to go to court to attempt to force Activision to cease production of Atari 2600 games, Nintendo had anticipated and encouraged the involvement of third-party software developers—strictly on Nintendo’s terms. To this end, a 10NES authentication chip was placed in every console, and in every officially licensed cartridge. If the console’s chip could not detect a counterpart chip inside the cartridge, the game would not be loaded.

Referred as "inventory management" by Nintendo of America public relations executive Peter Main, Nintendo would refuse to fill all retailer orders. Retailers, many of whom derived a large percentage of their profit from sales of Nintendo-based hardware and software (at one point, Toys "R" Us reported 17% of its sales and 22% of its profits were from Nintendo merchandise), could do little to stop these practices. In 1988, over 33 million NES cartridges were sold in the United States, but estimates suggest that the realistic demand was closer to 45 million. Because Nintendo controlled the production of all cartridges, they were able to enforce these rules on their third-party developers

Following the introduction of Sega’s Mega Drive/Genesis, Nintendo began to face real competition in the industry, and in the early 1990s was forced to reevaluate its stance towards its developers, many of whom had begun to defect to other systems. When the console was reissued as the NES 2, the 10NES chip was omitted from the console, marking the end of Nintendo’s most notorious hold over its third-party developers.

A thriving market of unlicensed NES hardware clones emerged during the heyday of the console’s popularity. Initially, such clones were popular in markets where Nintendo never issued a legitimate version of the system. In particular, the Dendy, an unlicensed hardware clone produced in Russia and other nations of the former Soviet Union, emerged as the most popular video game console of its time in that setting, and enjoyed a degree of fame roughly equivalent to the that experienced by the NES/Famicom in North America and Japan. The unlicensed clone market has persisted, and even flourished, following Nintendo’s discontinuation of the NES. As the NES fades into memory, many such systems have adopted case designs which mimic more recent game consoles. NES clones resembling the Sega Genesis, the Super Nintendo Entertainment System, and even current systems like the Nintendo GameCube, the Sony PlayStation 2 and the Microsoft Xbox have been produced. Some of the more exotic of these systems have gone beyond the functionality of the original hardware, and have included variations such as a portable system with a color LCD (e.g. Pocket Famicom). Others have been produced with certain specialized markets in mind, including various "educational computer packages" which include copies of some of the NES’s educational titles and come complete with a clone of the Famicom BASIC keyboard, transforming the system into a rather primitive personal computer.

As was the case with unlicensed software titles, Nintendo has typically gone to the courts to prohibit the manufacture and sale of unlicensed cloned hardware. Many of the clone vendors have included built-in copies of licensed Nintendo software, which constitutes copyright infringement in most countries. As recently as 2004, Nintendo of America has filed suits against manufacturers of the Power Player Super Joy III, an NES clone system that had been sold in North America, Europe, and Australia.

Although most hardware clones were not produced under license by Nintendo, one exception is the Twin Famicom, produced by Sharp Corporation. The Twin Famicom was compatible with both Famicom cartridges and Famicom Disk System disks. It was available in two colors (red and black) and used similar hardwired controllers to the original Famicom, but featured a different case design.

Technical specifications

* Dimensions
o North America:
+ 'toaster' version: 10" width x 8" length x 2.5" height (note that when open, the door over the cartridge slot goes another 1" high)
+ toploader version: 6" width x 7" length x 1 1/2" height
+ cartridge: 5.5" length x 4.1" width
o Japan:
+ cartridge: 3" length x 5.3" width
* CPU: Ricoh 8-bit processor based on MOS Technology 6502 core, custom sound hardware, and a restricted DMA controller on-die
o Region differences
+ NTSC version, named RP2A03, runs at 1.79 MHz; this CPU was also used in PlayChoice-10 and Nintendo Vs. Series
+ PAL version, named RP2A07, runs at 1.66 MHz
o Main RAM: 2 KiB plus expanded RAM if present on the cartridge
o ROM: Up to 49128 bytes (just shy of 48 KiB) for ROM, expanded RAM, and cartridge I/O; bank switching can expand this by orders of magnitude
o Audio: Five sound channels
+ 2 pulse-wave channels, variable duty cycle (25%, 50%, 75%, 87.5%), 16-level volume control, hardware pitch-bend support, supporting frequencies from 54 Hz to 28 kHz.
+ 1 triangle-wave channel, fixed volume, supporting frequencies from 27 Hz to 56 kHz
+ 1 white-noise channel, 16-level volume control, supporting two modes (by adjusting inputs on a linear feedback shift register) at 16 preprogrammed frequencies
+ 1 delta pulse-code modulation (DPCM) channel with 6 bits of range, using 1-bit delta encoding at 16 preprogrammed sample rates from 4.2 kHz to 33.5 kHz, also capable of playing standard PCM sound by writing individual 7-bit values at timed intervals.
* Picture processing unit (PPU): Ricoh custom-made video processor
o Regional differences
+ NTSC version, named RP2C02, runs at 5.37 MHz and outputs composite video
+ PAL version, named RP2C07, runs at 5.32 MHz and outputs composite video
+ PlayChoice-10 version, named RP2C03, runs at 5.37 MHz and outputs RGB video (at NTSC frequencies)
+ Nintendo Vs. Series versions, named RP2C04 and RP2C05, run at 5.37 MHz and output RGB video (at NTSC frequencies) using irregular palettes to prevent easy ROM swapping of games
o Palette: 48 colors and 5 grays in base palette; red, green, and blue can be individually darkened at specific screen regions using carefully timed code.
o Onscreen colors: 25 colors on one scanline (background color + 4 sets of 3 tile colors + 4 sets of 3 sprite colors), not including color de-emphasis
o Hardware-supported sprites
+ Maximum onscreen sprites: 64 (without reloading sprites mid-screen)
+ Sprite sizes: 8×8 or 8×16 pixels (selected globally for all sprites)
+ Maximum number of sprites on one scanline: 8, using a flag to indicate when additional sprites are dropped (to allow the software to rotate sprite priorities, causing flicker)
o PPU internal memory: 256 bytes of on-die sprite position/attribute RAM ("OAM") and 28 bytes of on-die palette RAM (allowing for selection of background and sprite colors) on separate buses internal to the PPU
o PPU external memory (Video RAM): 2 KiB of RAM for tile maps and attributes on the NES board and 8 KiB of tile pattern ROM or RAM on the cartridge (with bankswitching, virtually any amount can be used within manufacture cost)
o Scrolling layers: 1 layer, though horizontal scrolling can be changed on a per-scanline basis (as can vertical scrolling via more advanced programming methods)
o Display resolution: 256×240 pixels, though NTSC games usually used only 256×224, as the top and bottom 8 scanlines are not visible on most television sets (see overscan); for additional video memory bandwidth, it was possible to turn off the screen before the raster reached the very bottom.
o Video output
+ Original NES: RCA composite output and RF modulator output
+ Original Famicom (Japan) and NES 2: RF modulator output only
+ AV Famicom: Composite video output only, via a Nintendo proprietary 12-pin "multi out" connector first introduced for the Super Famicom/SNES.
+ PlayChoice 10: inverted RGB video output

No comments :